ABOUT ROXX BRAND: ROXX 's mission is to bring the best quality automotive parts and accessories to our customers. With rigorous research and development, our team provides a pure passion for the automotive industry allowing us to supply our customers with the best online shopping experience possible. We are committed to providing one of the best performance auto parts, including headlights, taillights, fog lights, LED conversion lights, off-road LED light bars, bullpens, side pedals, fender flares, etc. Fitment 2020 Ford Explorer2021 Ford Explorer Features: ✔High visibility: Brilliant Luminous Light Output and Sharp Cutoff Line ✔Longer-lasting: Withstand any extreme weather like dense fog, heavy rain, snow. Lifespan up to 50,000hrs ✔Comfortable Vision: Farther and Wider Vision to ensure your and others' driving safety! ✔Well-sealed Fog Lights: Breather valves to avoid moisture. ✔DOT&SAE approved: Legal and safe on the road. ✔Shatterproof Lens: Non-fading, Waterproof, Perform well in night times, rain, snow or, fog Product Specification Bulb Type: Led BulbLens Color: ClearLens Material: PCWiring Harness: IncludedCertification: DOT/SAE Compliance OEM NO. L: LB5B-15A255-ACR: LB5B-15A254-AC PARTSLINK L: FO2592254R: FO2593254 Perfect Package Firstly received your package and check if the packaging damage or defect.Then open the box and inspect the item. Verify what was received was what you ordered and that the item is free from physical damage or defect. Easy Installation Third remove the old light. First thing you have to do is undo the mounting screws on the outside, if there’s any. You’ll have to open the trunk or any rear door or opening on the vehicle to access the back of the light. The wiring harness must be disengaged from the assembly through its back.Fourth once the wiring harness is out, you can now undo the mounting screws or nuts, whatever fastener is used. With no more screws or nuts holding it in place, you can push out the assembly from behind. Check if the light assembly you just removed is the same as the new one. Factory Bolt-On OE Fitment Fifth see if they have the same components, design, and fasteners to ensure proper fitting. Fix the new assembly into the light pocket. Once it’s fitted into place, secure it with the screws or nuts. Tighten them properly. You can now plug in the wiring harness that you removed earlier.If you don't know how to install, you could go to consult us at any time, and we have professional technicians to help you. Or you could go to a professional physical store to install. Perfect fitment and Cool appearance Finally, test the new assembly. Switch on the lights to see if they work. If not, then some adjustments should be done to the newly installed light kit. Put back any cover, trim, or component that was removed to access the light assembly.Note: The change of light bulb may cause water vapor, which due to the bulb is not fit the lamp body well. Professional Installation is highly recommended. SNOWING To ensure that the unit can withstand a wide range of temperature without reduce light output safety. RAINING All tail light housing use the gum to seal with the lens. It's very good waterproofThere some waterproof cap or waterproof breathable patch. This design would let the temperature down and have more long lifetime FOGGING Tail lights will enhance visibility during fog weather. keep driver safety. DUST-PROOF To ensure the unit is properly sealed against harmful road dust and debris.