MNJ Motor 8 Gang Switch Panel has 8 circuits, 2 rated at 5A, 2 rated at 10A, 2 rated at 20A, 2 rated at 30A. 1.It has high sensitivity, stability and strong anti-interference ability. Compact size and lightweight, save more space. 2.Comes with all necessary hardware for installation, and 50 different switch stickers included for DIY your specific need. 3.This switch panel can be used on dash panel, dashboard, center console, etc, widely applied to 12-24V vehicles, off road, car, truck, power sports, marine, boat, yacht, trailer, bus, and so on. Independent Circuit Control 8 Groups of circuits with independent fuses to protect the circuit safety, not interfere with each other DIY Labeling Sticker 50 pcs self-adhesive sticker to choose from, which help to customize your own switch panel 60A Circuit Breaker 60A Circuit Breaker adds extra safety to your circuit, it will automatically disconnect once encounter high working temperature MNJ Motor 8 Gang Switch Panel kit Package Contents 1x 8 Gang Switch Panel 1x Circuit Control Box 1x 60A Circuit Breaker 50x Switch Labels 4x Necessary Mounting Brackets 9x Cable Ties Scre w Sets & Wiring Harness Specification: Input Voltage: 12V/24V DC Maximum Current: 60A Maximum Instantaneous Current: 100A Operating Temperature: - 40°C ~ + 150°C Maximum Power: 600W at 12V/1200W at 24V Steady On Mode: Long press ON/OFF switch for 3~5 seconds, the button light will flash, then enter the steady on setting mode. Momentary Mode: Step 1: Long press ON/OFF switch for 3~5 seconds, the button light will start to flash (it will flash slowly when enter the steady on setting mode). Step 2: Short press ON/OFF switch to enter the momentary mode (the button light flashes rapidly). Step 3: Click the button that you need momentary mode, long press ON/OFF switch for 3~5 seconds. The setting is successful until the button light does not flash. Reset Mode: Step 1: Long press ON/OFF switch for 3~5 seconds, the button light will flash slowly and enter the steady on setting mode. Step 2: Click all the button to light up. Step 3: Long press ON/OFF switch again for 3~5 seconds, it is OK to reset. Memory Mode: With memory function, it keeps the same mode after you turn off and then turn on again.